As a faculty of the Earth Sciences Department at Goa University, Dr. A.G Chachadi wanted to develop a facility to harvest rainwater and recharge groundwater at the campus at Taleigao Plateau. He wanted to showcase rainwater harvesting within the campus and also spread awareness on the benefits of doing it.
Initial calculations showed that groundwater at the University campus was pumped out at a rate of about 250 m3 per day from all the 7 operational borewells for about 300 days in a year. That totals about 75000 m3 of groundwater every year. He did a simple calculation to understand how much rainwater could be harvested before implementing the system.
- Total drainage area contributing surface runoff = 30000 m2
- Daily average monsoon rainfall in the area = 0.02m/day
- Surface runoff collected per day (50% of rainfall) = 300m3
- Estimated recharge to sub-surface thru borewell = 250m3
- Ratio of aquifer recharge to runoff collection= 250/300 = 83%
- Amount lost due to seepages, evapo-transpiration and other factors = 17%
Device to measure groundwater recharge. The well yield tests carried out on two borewells located in close proximity of the present recharge structure in May 2008, that is after one year of operation of the first recharge structure, have confirmed that there is an increase in the well yields by 13% to 15%.How does the system work?
At the site, the rainwater falling on the ground is collected into a 70m x 50m size depression using gravity flow. The structure has three parts of which the first part with a size of 20m x 10m and depth of 2m allows the suspended solids to settle down.
Schematic diagram of the surface runoff harvesting systemOverview of the structuresThe rainwater harvesting structures built in the campus have minimum maintenance activities and recurring costs. The various annual maintenance activities include:
rainwater_harvesting_for_aquifer_storage_recovery.pdf
Previewurban_rainwater_harvesting_report.pdf
Preview