We have drilled a borewell with 450 ft depth. At 3 inch water was struck. We placed 7.5 HP pump at 350 ft. Within a month the motor got stuck. It was filled with sand. Took out pump and cleaned then placed it at 240 ft. After that it got stuck again. This time we placed 5 HP pump at 130 ft. We found water level was 30 ft and silt was at 200 ft. Now clear water is coming with little gap. We wish to know what is the best solution to this.
If any professional around Jadcherla in Telangana or even Hyderabad can provide some advise we would take his service on payment
Thank you
Bharadwaja
phone 9642034864